A brake is an important safety feature in a car. Over time the brake pads and rotors accumulate dust and contaminants. With time, a brake becomes less effective and can pose serious safety concerns. That’s why brake burnishing and cleaning becomes essential for proper brake performance.

While burnishing is a process to improve the braking performance, cleaning is equally important to eliminate accumulated dust on the brakes. Besides, brake pad burnishing and cleaning are crucial in electric cars due to the regenerative braking process. Let’s go through more details about the brake burnishing procedure and cleaning of brake components. 

Brake burnishing, also known as brake bedding or brake conditioning, is a process to enhance the performance and longevity of brake pads and rotors. It involves subjecting the brakes to a series of controlled stops to generate heat and transfer a thin, even layer of brake pad material onto the brake rotor surface. 

This process helps to improve brake pad and rotor compatibility. However, if the brake burnishing isn’t done correctly, the rotors and pads can wear out and become a reason for squealing noises from brakes. 

During burnishing, the brake pads and rotors undergo a cycle of heating and cooling. It ensures that the pads make full contact with the brake rotor surface. This helps to minimise the chances of uneven brake pad material deposition, known as brake pad glazing. Moreover, brake pad glazing can reduce braking efficiency and lead to noise and vibration. That’s why one must learn the process of brake burnishing.

Burnishing of brake pads can significantly reduce the squealing noises. If you don’t burnish, you may witness the signs of bad brake pads such as spongy brakes or noises. Therefore, you must follow these steps for brake burnishing. 

After the replacement of brake pads and rotors when they wear out, you must complete the brake burnishing process to ensure their optimum performance. It has the following importance:

Over time, car brakes accumulate dust. Brake cleaning is a maintenance task that involves removing brake dust, dirt, grime and other contaminants from the brake components to ensure optimal braking performance and longevity. 

While the dust is caused by friction and driving habits, you must follow the brake dust prevention tips to avoid it. Here’s the process to clean and maintain the brakes after burnishing.

The brake cleaning process is essential for maintaining performance and overall safety. Here’s how to clean brake dust:

Brake dust can cause jamming between the components. It can become one of the main reasons for brake overheating and may cause brake failure. That’s why brake burnishing and cleaning become essential. Here is the importance of brake cleaning:

Yes, brake burnishing can shape the rotors and pads to work properly and reduce friction.

Yes, brake cleaning can help identify problems, such as wear and tear, corrosion, damage or thin pads at an early stage.

It takes around six times or 200 stops to burnish brake rotors and pads.

These were all the details about brake burnishing and cleaning, which are essential processes. When you buy a used car in the UAE, make sure you clean the brakes and use the burnishing process when changing rotors and pads. Since brakes are subject to failure, learn these tips to deal with car brake failure. Always ensure maintenance to avoid car brake failure.

Stay tuned to the dubizzle autos blog as we bring you common car problems, repairs and procedures.